Aligning The Print Head Using The Product Control Panel - Epson ET-2750U User Manual

Note: Banding may also occur if your print head nozzles need cleaning.

Aligning the Print Head Using the Product Control Panel

Parent topic:
Aligning the Print Head Using the Product Control Panel
You can align the print head using the control panel on your product.
1. Make sure there are no errors on the LCD screen and the output tray is extended.
2. Load a few sheets of plain paper in the product.
3. Press the
4. Select Maintenance and press the OK button.
5. Select Print Head Alignment and press the OK button.
6. Do one of the following:
• Select Vertical Alignment and press the OK button.
• Select Horizontal Alignment and press the OK button.
7. Press the OK button to print an alignment sheet.
Note: Do not cancel printing while you are printing a head alignment pattern.
Adjusting Print Quality
home button, if necessary.
159