Table of Contents
Advertisement
Choosing the installation location
Outdoor Unit
Where it is not exposed to strong wind
Well ventilated and dustless places
Out of the direct sunlight and rain
Where neighbors are not annoyed by operation sound or hot air
Solid wall or support that prevents vibration and is strong enough to hold the product weight
Where there is no risk of flammable gas leakage
When installing the unit at a high place be sure to fix the unit legs
3m or more away from the TV or radio (to prevent the screen from being distorted or noise from being generated)
Install the unit horizontally
Place where drained water does not become any problem.
Place with no plants (especially climbing plants) and where small animal can not access.
• Avoid the following places to prevent malfunction of the unit
- Where there is machine oil
- Where sulfide gas exists
Observe the clearances and maximum lengths as seen in the picture below when installing the air conditioner.
If using a multi system, install as described in the installation manual supplied with the outdoor unit.
Wrap the refrigerant pipes and the drain hose
with the absorbent pad and vinyl tape. Refer to
page 40 for further details.
300mm
minimum
600mm
minimum
26
AQV09K&Y@@_Jungfrau_IBIM_E_32448A.indd 26
125mm
or more
' L ' meters maximum
600mm
total pipe length
minimum
Make at least one round: It will reduce noise and vibration.
The appearance of the unit may be different from the diagram depending on the model.
- Salty environment such as seaside areas
- Other special atmosphere areas
300mm or more
You can select the direction of
draining
(left or right).
'L' m as maximum pipe length
and 3 m as minimum pipe length.
(It will reduce noise and vibration)
300mm
minimum
125mm
or more
' H ' meters maximum total
pipe length
Model
L
H
15
8
09/12
30
15
18
2011-3-19 16:01:20
Advertisement
Table of Contents
