Table of Contents
Advertisement
Installing the Unit
The installation distance between the unit and a screen
varies depending on the size of the screen or whether or not
you use the lens shift features. Install this unit so that it fits
the size of your screen. For details on the distance between
the unit and the screen (the projection distance) and the
size of projected video, see "Projection Distance and Lens
Shift Range" (page 43).
1
Position the unit so that the lens is parallel to the
screen.
Top view
2
Project an image on the screen and adjust the picture
so that it fits the screen (page 8).
Note
When using a screen with an uneven surface, stripes pattern may
rarely appear on the screen depending on the distance between the
screen and the unit or the zooming magnifications. This is not a
malfunction of the unit.
Screen
Selecting the Menu
Language
The factory setting for the language for displaying menus,
messages, etc. is English.
To change the on-screen language, proceed as follows:
1
After connecting the AC power cord to the unit, plug
the AC power cord into a wall outlet.
The ON/STANDBY indicator lights in red and the
unit goes into standby mode.
2
Press the ?/1 button on the unit or the ? button on the
remote control to turn on the unit.
The ON/STANDBY indicator flashes in green, and
then lights in green.
3
Press MENU to display the menu.
The menu window appears.
7
Lights in red.
Flashes in green for
tens of seconds and
then lights in green.
Advertisement
Table of Contents
