Table of Contents
Advertisement
Setting items
Expert Setting
NR (Noise Reduction)
MPEG NR (MPEG Noise
Reduction)
Smooth Gradation
Gamma Correction
Color Correction
Clear White
Description
Reduces the roughness or noise of the picture.
Auto: Detects the noise level to reduce the roughness or noise of the picture automatically.
High/Middle/Low: Select a setting according to the roughness or noise of the input signal source.
Off: The NR (noise reduction) function is not applied.
Tip
The noise level may not be detected accurately with "Auto" depending on the input signal source. If the
picture is unacceptable with "Auto," select a setting from among "High," "Middle," "Low" or "Off."
Reduces block noise and mosquito noise, particularly in digital signals.
Auto: Detects the noise level to reduce the block noise and mosquito noise of the picture automatically.
High/Middle/Low: Select a setting according to the block noise and mosquito noise of the input signal
source.
Off: The MPEG NR (MPEG noise reduction) function is not applied.
Tip
The noise level may not be detected accurately with "Auto" depending on the input signal source. If the
picture is unacceptable with "Auto," select a setting from among "High," "Middle," "Low" or "Off."
Smooths the gradation of the flat parts of images.
High/Middle/Low: You can adjust the smooth gradation effect.
Off: The smooth gradation function is not applied.
Adjusts the response characteristics of the tone of the picture.
Select a favorite tone from 10 options.
1.8: Bright
Produces a brighter picture overall.
2.0
2.1
2.2
2.4
2.6: Dark
Produces a darker picture overall.
Gamma 7: Simulates the gamma curve of film.
Gamma 8: Increases the sharpness in images. Select this when you watch in a bright environment.
Gamma 9: Produces a brighter picture than Gamma 8.
Gamma 10: Increases the sharpness in images. Select this when you watch TV programs, etc., in a
bright environment.
Off: The "Gamma Correction" function is not applied.
On: Adjusts Hue, Saturation and Brightness of the selected colors.
Repeat steps 1 and 2 described below to specify the target color.
1 Press M/m to select "Color Select," then press </, to select the color you want to adjust among
"Red," "Yellow," "Green," "Cyan," "Blue," and "Magenta."
2 Press M/m to select "Hue," "Saturation" or "Brightness," then adjust them to suit your taste using
</, while watching the projected picture.
Off: The "Color Correction" effect is not applied.
Emphasizes vivid whites.
High/Low: You can adjust the "Clear White" effect.
Off: The "Clear White" effect is not applied.
20
Advertisement
Table of Contents
