Connections; Flying Sxf115 - Martin Audio SXC115 User Manual

SX SERIES USER GUIDE
SXF115

Connections

The SXF115 has a pair of NL4 connectors on the rear panel. These are wired in parallel and whilst one is nominally labelled 'INPUT' and
the other as 'LINK', connection in and out can be made to either connector. Connection to the drive unit(s) is made to pins 1+/-. There is
no internal connection to pins 2+/- although these are linked together so can be used for example to carry a mid/top signal and connected
to a full range system using a cable wired with reverse connections (pins 2 to pins 1).

Flying SXF115

The SXF115 may be flown using the ASF20054 or ASF20064 flying frames which are also used with the MLA Mini system. The ASF20054
is designed for installations, whilst the ASF20064 is fitted with an inclinometer sensor and supplied with shackles making it suitable for
touring applications. Deployment of the system is identical with both versions of the flying frame.
With the sub on the floor under the desired position for its final deployment, attach the frame to the chain or motor hoist(s) and raise so it
is just above the SXF115. Remove the four flying pins on the bottom of the flying frame to release the drop-down rigging links.
21
Copyright © 2021 Martin Audio Ltd. SX SERIES USER GUIDE V2.5