Table of Contents
Advertisement
Change the Label Printer Settings
Printer Setting Tool for Mac
Using the Printer Setting Tool, you can specify the printer's communication settings and device settings from
a Mac. Not only can you change the device settings for one printer, but you can also apply the same settings
to multiple printers.
Note
The Printer Setting Tool can be installed using the Software/Documentation installer. For more
information, see Install the Printer Driver and Software on a Computer on page 8.
Before Using the Printer Setting Tool
Make sure the AC Power Cord is connected to the printer and to an electrical socket.
Make sure the printer driver has been installed correctly and you can print.
Connect your printer to a computer with a USB cable.
Use the Printer Setting Tool for Mac
a
Connect the printer you want to configure to the computer.
b
Click Macintosh HD > Applications > Brother > Printer Setting Tool > Printer Setting Tool.app.
The Printer Setting Tool window appears.
c
Check that the printer you want to configure appears next to Printer. If a different printer appears, select
the printer you want from the pop-up list.
d
Select any of the Settings Tabs, and then specify or change the settings you want.
e
Click Apply Settings to the Printer to apply the settings to the printer.
f
Click Exit.
IMPORTANT
Use the Printer Setting Tool to configure the printer only when the printer is idle. The printer may
malfunction if you try to configure it while it is processing or printing a print job.
3
3
3
3
19
Advertisement
Table of Contents
