Table of Contents
Advertisement
5
Pull out the two knobs from control panel. Insert temperature gauge stem into the bigger hole above knob bezel, shown A.
Make sure the gauge is pushed in as far as it will go, then push the gauge downward until it clips into the panel, shown B/C.
Re-install the two knobs.
Temperature gauge stem
A
B
Back of the panel
Temperature gauge
C
Control panel
Knob bezel
Knob
6
Attach right side fascia to right side shelf using two #10-24x3/8" screws, 5mm lock washers and 5mm flat washers.
Only right side shelf shown for assembly, install left side shelf with fascia in the same way.
5mm flat washer
5mm lock washer
#10-24x3/8" screw
Right side shelf
Right side fascia
15
Advertisement
Table of Contents
