Kyocera 1102RX3NL0 Operation Manual page 132

Setup and Registration (System Menu) > System Menu
Item
Print Quality
KIR Mode
EcoPrint Mode
Resolution
Print Density
Page Setting
Copies
Orientation
Wide A4
XPS FitTo Page
TIFF/JPEG Size
User Name
Job Name
Set the Print Quality.
The machine is equipped with the smoothing function, which realizes an excellent printing of
about 9600 dpi (600 dpi × 15 gradation) × 600 dpi.
Value: Off, On
EcoPrint conserves toner when printing. This is recommended for test copies where faded
printing is not a problem.
Values: Off, On
Set the resolution used for printing.
Value: Fine 1200 mode, Fast 1200 mode, 600 dpi, 300 dpi
NOTE
Settings that are received from the printer driver have priority over the operation panel settings.
Adjust print density. Adjustment can be made in 5 levels.
Value: 01 to 05
You can set print preferences such as the number of pages and print orientation.
Set the default number of copies, from 1 to 999.
Value: 1 to 999 copies
You can select portrait (upright) or landscape (sideways) page orientation.
Value: Portrait, Landscape
Turn this to on to increase the maximum number of characters that can be printed in a line for
an A4 page (78 characters at 10 pitch) and Letter size page (80 characters at 10 pitch). This
setting is only effective in PCL 6 emulation.
Value: Off, On
Set the default value for the XPS fit to page function.
Value: Off, On
Select the image size (resolution) when printing JPEG or TIFF file.
Value: Paper Size, Image Resolution, Print Resolution
Set whether the user name set in the printer driver is displayed.
Value: Off, On
Set whether the job name set in the printer driver is displayed.
Value: Off, Job Name, Job No.+Job Name, Job Name+Job No.
Description
6-9