Quick Operation Guide - Panasonic Palmcorder Multicam PV-L672 Operating Instructions Manual

Quick Operation Guide

Charging the Battery Pack
Charge Battery Pack fully before
operation (page 9).
1
2
Insert Battery. CHARGE Lamp
flashes, then stays lit when
charging is complete.
Camera Recording
See page 17.
1
Press LCD-OPEN to unlock the LCD monitor.
Swing it fully open and adjust the angle.
Playback using the LCD Monitor
See page 20.
1
Press LCD-OPEN to unlock the LCD monitor.
Swing it fully open and adjust the angle (see above).
2
Set POWER
to VCR.
8
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Insert Cassette
Plug in AC
Adaptor.
Protection Film
Note:
• Remove the Protection Film before use.
1
Attach fully
charged Battery
(page 9).
2
Slide TAPE
EJECT to open
door.
3
Insert cassette
(page 11).
4
Press here to
close door.
2
Set POWER to CAMERA.
3
Press RECORD/PAUSE
to start recording.
Press RECORD/PAUSE
again to pause recording.
3
Press REWIND/SEARCH
to rewind tape.
4
Press PLAY to start
playback.
5
Press STOP to stop
playback.