Digital Wipe Mode - Panasonic Palmcorder Multicam PV-L672 Operating Instructions Manual

Digital Wipe Mode

Insert a captured still image into the
current recording, or vice versa, in one of
three wipe effects.
2
Digital Still Camera
Before you begin...
• Connect Camcorder to power source.
• Insert the Memory Card (optional, page 34).
• Set POWER to CAMERA.
1
Repeat steps 1-3 on page 40 to set
Picture in Picture Wipe title.
2
Press MODE repeatedly for Wipe
effect 1, 2, or 3 (See left).
• WIPE 1 will flash for a while to store
3 the image for the wipe.
3
Press START:
once © inserts captured image.
twice © inserts current recording
• You can freeze the wipe in progress
by pressing START. Press START
again to resume wipe.
Note:
• If Memory Card is not inserted, "NO
CARD" appears on-screen. Set Power to
OFF, then insert the Memory Card.
• Pictures captured with other brand
products cannot be used with this
Camcorder.
• If "INCOMPATIBLE IMAGE" appears on-
screen, the size of the captured image
cannot be played back on this
Camcorder.
• If "CARD ERROR" appears on-screen,
see page 56.
• If Digital Wipe mode is selected, the
following functions are not available:
MotionSensor, Auto Fade, Digital Fade,
Color Digital Filter, Digital Zoom, Digital
E.I.S., Still/Strobe/Wide.
picture.
41