Remove Pump And Clean Pump Tower - AeroGarden PRO Cleaning Manual

Remove Pump and Clean Pump Tower

2
Follow the steps whether your are cleaning a Pump from a planted
AeroGarden or an empty AeroGarden.
Unplug your AeroGarden.
A
Remove Bowl from Base.
B
Remove Grow Surface from Bowl and bring to sink or set on towel.
C
Hint: Lift the View Door and slide one hand into the Bowl to lift.
Remove Filter from the back of the Pump Tower and
D
rinse under hot water or discard if you have a new Filter.
(Missing or torn Filter? See Troubleshooting on Page 7.)
Turn Grow Surface upside down and remove Cover Plate.
E
1 Insert flat-head screwdriver at an angle into rectangular
slot on right side of Pump Tower and gently push down
on screwdriver.
2 Repeat step "1" on rectangular slot on left side
of Pump Tower.
Pump
Remove the Pump by inserting the flat-head screwdriver
F
into the space under the Pump. Push down on the handle
of the screwdriver to lift the Pump out of the Pump Tower.
Pull Pump Wire from Wire Slot but
G
keep it attached to Grow Surface.
Rinse out any residue or roots from
H
Pump and Pump Tower in sink. It is
okay to get everything (the Pump,
Pump Wire and Grow Surface) wet.
Cover Plate
1
2
Grow Surface
Filter
Page 3