Philips NT9148 Manual page 29

Trimming eyebrows with the eyebrow
combs
1 Comb your eyebrows in the direction of hair
growth.
2 Choose the short or long comb, depending
on the desired hair length. The millimetre
indications are on the combs.
- short comb: 3mm/0.12in
- long comb: 5mm/0.2in
Tip: We advise you to start trimming with the long
comb. If you think your eyebrows are still too long after
this, use the short comb.
3 Slide the eyebrow comb onto the nose/ear/
eyebrow trimming head.
Make sure that the eyebrow comb has been
properly slid into the grooves on both sides.
4 Move the comb over the eyebrow from the
outer tip of the eyebrow towards the base of
the nose (against the direction of hair growth).
Cleaning
Clean the appliance immediately after use and when
a lot of hair or dirt has accumulated on the cutting
elements.
Never use compressed air, scouring pads, abrasive
cleaning agents or aggressive liquids such as petrol
or acetone to clean the appliance.
Do not tap on the cutting elements.
Do not use any sharp objects to clean the cutting
elements.
28
ENGLISH