Table of Contents
Advertisement
1
Put the precision trimming head on the
appliance (see section 'Attaching and detaching
the attachments' in chapter 'Preparing for use').
2
Put the precision trimming comb on the
precision trimming head and push it until it
locks into place ('click').
3
Switch on the appliance. Turn the battery
compartment cover from the 'off' position (0)
to the 'on' position (I).
4
Move the appliance slowly and with light
pressure against the direction of hair growth.
Note: To make trimming easier, stretch the skin with
your free hand during trimming.
Note: Make sure that the fl at part of the comb always
touches the skin to obtain an even result.
Note: Do not press the appliance with the comb onto
the skin too hard. This may cause the appliance to
trim the hairs shorter than the length indicated on the
comb.
Note: In areas where the hair grows in different
directions, move the appliance upwards, downwards
and sideways.
24
ENGLISH
Advertisement
Table of Contents
