Xerox EC8036 User Manual page 251

P P r r i i n n t t e e r r H H a a s s T T w w o o P P o o w w e e r r S S w w i i t t c c h h e e s s
Probable Causes
The printer has two power switches and one is not
powered on.
P P r r i i n n t t e e r r D D o o e e s s N N o o t t P P o o w w e e r r O O n n
Probable Causes
The power switch is not switched on.
The power cord is not plugged into the outlet
correctly.
Something is wrong with the outlet connected to the
printer.
The printer is connected to an outlet with a voltage
or frequency that does not match the printer
specifications.
Plug the three-wire cord with grounding prong directly into a grounded AC outlet. Do
Caution:
not use a power strip. If necessary, contact a licensed electrician to install a properly grounded
outlet.
Solutions
Power off the printer.
• Press the Power/Wake button on the control
panel.
• Open the front door and power off the main
power switch.
Power on the printer.
• Open the front door, then power on the main
power switch.
• At the printer control panel, press the Power/
Wake button. For details, refer to
Printer or Exiting Sleep
Solutions
• Open the front door and check that the main
power switch is in the On position.
• At the printer control panel, press the Power/
Wake button. For details, refer to
Printer or Exiting Sleep
Power off the printer, then plug the power cord into
the outlet securely. Use the bracket provided with the
printer to secure the power cord in place.
• Plug another electrical appliance into the outlet
and check if it operates properly.
• Try a different outlet.
Use a power source with the specifications listed in
the Electrical Specifications.
Xerox ® EC8036/EC8056 Color Multifunction Printer
Troubleshooting
Powering On the
Mode.
Powering On the
Mode.
251
User Guide