Bench Test Setup Conditions; Headers Description And Jumper Placement - Texas Instruments TPS65253 User Manual

Bench Test Setup Conditions

5 Bench Test Setup Conditions

5.1 Headers Description and Jumper Placement

PGOOD
EN1
Test points:
Black – GND
White – Each output, feed-back, power good and V
8 TPS65253 Buck Converter Evaluation Module User's Guide
EN2
LOW_P
Figure 5-1. Headers Description and Jumper Placement
IN
Copyright © 2021 Texas Instruments Incorporated
Vin:4.5V – 16V
. All marking on PCB.
www.ti.com
Vout2
Vout1
SLVU469B – JUNE 2011 – REVISED MAY 2021
Submit Document Feedback