Bench Test Setup Conditions; Header Description And Jumper Placement; Table 5-1. Input/Output Connection - Texas Instruments TPS65279V User Manual

Bench Test Setup Conditions

5 Bench Test Setup Conditions

5.1 Header Description and Jumper Placement

Figure 5-1 illustrates the header description and jumper placement for the EVM.
JP1/EN1
JP2/EN2
JP7/ADDR
JP8/MODE
GND
J1:5/12V
2
JP9:I C IO
POWER
2
JP15/I C
Test points:
A: LX of Vout1
B: LX of Vout2
Vout1, Vout2
Table 5-1 shows the I/O connections for the EVM.
Jumper Number
J1
J18
J31
8 TPS65279V Buck Converter Evaluation Module User's Guide
Figure 5-1. Header Description and Jumper Placement

Table 5-1. Input/Output Connection

Function
Vin Connector
Buck1 Connector
Buck2 Connector
Copyright © 2021 Texas Instruments Incorporated
J31:
VOUT2
B
A
J18:
VOUT1
Description
Apply power supply to this connector
Output of Buck1
Output of Buck2
SLVU876A – FEBRUARY 2013 – REVISED MAY 2021
Submit Document Feedback
www.ti.com