3: Preventing The Tv From Toppling Over; 4: Bundling The Cables - Sony BRAVIA KLV-55EX630 Operating Instructions Manual

3: Preventing the
TV from
toppling over
1
Install a wood screw (4 mm in diameter, not
supplied) in the TV stand.
2
Install a machine screw (M4, not supplied)
into the screw hole of the TV.
3
Tie the wood screw and the machine screw
with a strong cord (not supplied).
• Please place the TV set on a stable, level
surface, if place on an unstable place, it may
caused TV set to topple over, fall down, and
caused injuries to people.
• An optional Sony support belt kit is used to
secure the TV. Contact your nearest Sony
service centre to purchase a kit. Have your TV
model name ready for reference.
The length of the M4 machine screw differs
depending on the cord diameter. Please see
below illustration.
6-8 mm
6
Screw M4
Cord
TV's stand
4: Bundling the
cables
• Before bundling the cables, remove the cable
holder from the AC cover (see step 1 and 2).
Reuse the cable holder (see step 3) to bundle
the other cables (see step 4).
• Do not bundle the AC power cord (mains lead)
together with other cables.
x KLV-60EX640
x KLV-55EX630