4: Preventing The Tv From Toppling Over; 5: Bundling The Cables - Sony KDL-55W954A Operating Instructions Manual

4: Preventing the
TV from
toppling over
Soft cloth
~
• Before install the machine screw, lay the display
face down on a stable work surface that is larger
than the TV.
• To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on the
work surface.
1
Install a machine screw (M4, not supplied)
into the screw hole of the TV and tie with a
strong cord (not supplied).
2
Install a wood screw (not supplied) in the TV
stand. Then, tie the strong cord to the wood
screw.
The length of the M4 machine screw differs
depending on the cord diameter.
Please see below illustration.
6-8 mm
1
Screw M4
Cord
TV's Table-Top
Stand
5: Bundling the
cables
Before bundling the cables, remove the cable
holder from the AC cover. Reuse the cable
holder to bundle the other cables.
~
• Do not bundle the AC power cord (mains lead)
together with other cables.
• Do not bundle the AV cables together with other
cables (KDL-55/46W954A, KDL-55/46W950A
only).
KDL-55/46W954A, KDL-55/46W950A
1 2
4 * 4
3
5 5 6
7
Except KDL-55/46W954A,
KDL-55/46W950A
1 2
3 *
4
(Continued) 13
GB