Mitsubishi AL-232CAB Hardware Manual page 16

α
Simple Application Controller
Table 2.8:Environmental and Electrical Specifications
Description
Insulation Resistance
Type of Action
ENG
Type of Action
Software Class
Construction of Control
Whether the Control is electric EN 60730-1, Section H2.5.7 - Electric Control
Safety Class
Pollution Control
Grounding
Electrical Isolation
Operation Ambience
Protection
Certifications
Attestation of Conformity
Complies with
Liquid Crystal Display
7 Mohm at 500V DC per EN60730-1 between the following points:
Power/Input Terminals and Relay Output Terminals
Relay Output Terminal and Relay Output Terminal
All Terminals and the DIN 43880 Control box or equivalent
EN 60730-1, Section 6.4.3 - Type 1C (Relay Output)
EN 60730-1, Section 6.4.3 - Type 1Y (Transistor Output)
EN 60730-1, Section H6.18 - Class A
EN 60730-1, Section 6.15 - Incorporated Control
II
For use in normal pollution situations
None
Reinforced primary/secondary insulation
To be free of corrosive gases. Dust should be minimal.
IP 20
CE, UL/cUL
TÜV (AL-10MT-D, AL-10MR-D)
UL 508
EN60730-1
EN61010-1
EN50081-1
EN50082-1
EN50082-2
Will display 4 lines of ten characters per line, Program Run On/Off mode,
Password Protection, Image Table, and Function Blocks during programming.
Hardware Specification 2
Specification
10