Jenn-Air JGC3530GS Installation Instructions Manual page 4

Table of Contents

Advertisement

Available languages

Available languages

Installation Clearances
IMPORTANT: If installing a range hood or microwave hood
combination above the cooking surface, follow the range hood
or microwave hood combination installation instructions for
dimensional clearances above the cooktop surface.
B
G
A
A
A. 18" (45.7 cm) minimum clearance upper cabinet to countertop
B. Cabinet
C. 36" (91.4 cm) on 30" (76.2 cm) models
42" (106.7 cm) on 36" (91.4 cm) models
D. 13" (33 cm) maximum recommended upper cabinet depth
E. 6" (15.2 cm) minimum side wall clearance
F. 30" (76.2 cm) minimum clearance between top of cooktop platform
and bottom of uncovered wood or metal cabinet (24" [61 cm]
minimum clearance if bottom of wood or metal cabinet is covered by
not less than 1/4" [0.6 cm] flame retardant millboard covered with not
less than No. 28 MSG sheet steel, 0.015" [0.04 cm] stainless steel, or
0.024" [0.06 cm] aluminum or 0.020" [0.05 cm] copper)
G. 2
5
/
" (5.9 cm) minimum distance to rear combustible surface
16
H. 2
/
" (5.9 cm) minimum distance to front countertop edge
5
16
I. Cutout width 29
3
/
" (74.6 cm) on 30" (76.2 cm) models
8
Cutout width 35
/
" (89.9 cm) on 36" (91.4 cm) models
3
8
J. Cutout depth 20
/
" (51.8 cm)
3
8
NOTE: After making the countertop cutout, some installations
may require notching down the base cabinet side walls to clear
the burner box. To avoid this modification, use a base cabinet
with sidewalls wider than the cutout.
If cabinet has a drawer, a 4" (10.2 cm) depth clearance from the
countertop to the top of the drawer (or other obstruction) in base
cabinet is required. The drawer depth may need to be shortened
to avoid interfering with the regulator and power cord.
4
D
C
F
J
I
E
H
Flush Installation Dimensions
All cooktops can be mounted with a frameless standard
installation sitting on top of the countertop surface or flush
with the top of the countertop. If the cooktop is to be mounted
flush with the countertop, a 11/64"-deep (4.3 mm) recessed
area surrounding the cooktop cutout must be provided with
the following dimensions.
NOTE: This option is not recommended for countertops with
a molded backsplash. Do not silicone seal in place.
D
C
A. Recessed area length 21
B. Cutout length 20
/
" (51.8 cm)
3
8
C. Cutout width 29
3
/
" (74.6 cm) on 30" (76.2 cm) models
8
Cutout width 35
/
" (89.9 cm) on 36" (91.4 cm) models
3
8
D. Recessed area width 30
Recessed area width 36
E. Recessed area depth 11/64" (4.3 mm)
F. Recessed area radius 5/64" (2.0 mm) maximum
A
B
E
Cooktop
Foam Strip
3
/
" (53.8 cm)
16
/
" (76.5 cm) on 30" (76.2 cm) models
1
8
1
/
" (91.7 cm) on 36" (91.4 cm) models
8
F
E

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jgc3536gs

Table of Contents