Table of Contents
Advertisement
Home
Internet
network
Connection test is successfully
Pass
Pass
completed.
Connection test for home network
Fail
-
failed. Check the connection
settings.
Connection test for internet failed.
Pass
Fail
Check the connection settings.
If the connection test for internet passes, speed test
●
will start automatically.
3
Press OK to go to the list on network status
confirmation screen.
For wireless connection
Network connection test
IP address
192, 168, 1, 1
Subnet mask
255, 255, 255, 0
Default gateway
192, 168, 1, 254
Primary DNS
0, 0, 0, 0
Secondary DNS
0, 0, 0, 0
SSID
AP Name
Authentication
Done
For wired connection
Network connection test
192, 168, 1, 1
IP address
Subnet mask
255, 255, 255, 0
Default gateway
192, 168, 1, 254
Primary DNS
0, 0, 0, 0
Secondary DNS
0, 0, 0, 0
O
Note(s)
If the connection test for both home network and internet
●
pass, you are ready to use Apps or network upgrade
functions using the internet without making any additional
settings.
If the connection test fails, check if the Ethernet cable is
●
connected to this TV properly or if you have entered all the
required details for the wireless LAN connection properly.
Home network
You can turn your TV into a Digital Media Renderer (DMR), which
can play video, music and photo files stored on certified home
media servers connected to your home network.
1
Press Z and use J K to select Setup then press
OK.
2
Use H I J K to select Network settings, then press OK.
3
Use H I to select Home network, then press OK.
4
Use H I J K to select the item you want to adjust, then
press OK.
Off
Renderer
On
Change the display name of this TV to other
Renderer name
devices on the home network.
Description
Back
Back
Disable DMR.
Enable this unit to play files using
DMC.
Wireless screencasting
You can wirelessly cast or mirror the screen of your
Smartphone, Tablet or PC to the TV directly using
wireless screencasting.
Using wireless screencasting
1
Press Z and use J K to select Wireless
Screencasting, then press OK.
Wireless screencasting mode screen appears.
●
The TV is now ready to accept a connection from your source device.
If you want to exit, please press "BACK" key.
If you want to manage connected device history, please press "OPTIONS".
2
Activate wireless screencasting feature on your
device.
For the operation of your device, please check the
●
instruction manual of the device.
Select Your TV name on your device if needed.
●
If PIN code is required on your device, please enter the
●
8-digit code appearing in the left-hand side of the TV
screen.
3
Once connected, the screen of your device will
appear on your TV screen.
Press INFO to display your device name at the bottom
●
of TV screen.
Press t or OK to pause playback. Press K or OK again
●
to resume playback.
Using wireless screencasting device list
In wireless screencasting device list, you can find the
connected devices.
1
Press OPTIONS on remote when wireless
screencasting mode is on the TV screen.
Only the connected device names are listed.
●
It will be sorted from newest connection to oldest
●
connection. A maximum of 64 connections can be
recognized.
If you would like to delete a listed connection, press H
●
I to select the device name, then press OK first. Once
the confirmation message appears, please use J K to
select Yes, then press OK.
O
Note(s)
FUNAI CORPORATION, Inc. does not warrant wireless
●
screencasting compatibility with all source devices such
as smartphones, tablets, laptops, etc. due to large
variability in hardware, firmware, drivers, software and
implementation of wireless casting applications on these
source devices. Although FUNAI CORPORATION, Inc. will
strive to enhance compatibility and performance across a
range of source devices, FUNAI CORPORATION, Inc. does
not warrant compatibility with specific source devices.
9
MAGNAVOX Smart TV
Your TV name
Continued on next page.
Advertisement
Table of Contents
