Table of Contents
Advertisement
3 Use your TV
Watching channels from an external
device
1
Turn on the set-top box or the connected device.
The picture from the set-top box or the connected device
●
might appear automatically on the TV screen.
If the picture does not appear
2
Press SOURCE and use J K to select the set-top
box or the connected device, then press OK.
3
Use the remote control for the set-top box or the
connected device to select channels to view.
Displaying setup using Home menu
1
Press Z to display Home menu.
Home Network
Source
2
Use J K to select Setup, then press OK.
Guide to Home menu screen
Home menu start screen
a
b
Home Network
Source
a Source
b Home Network
c Apps
d Wireless
Screencasting
e Setup
Please read the detailed version of this Owner's manual on
●
www.magnavox.com/support/ for more information on
menu features.
Apps
Setup
Wireless
Screencasting
c
d
e
Apps
Setup
Wireless
Screencasting
: To select TV source or
connected devices.
: Accesses home network
menus.
: Accesses Apps menus.
: Accesses wireless
screencasting menus.
: Accesses menus that allow
you to change picture, sound
and other TV settings.
Network
Setup network connection settings in order to use
Apps or network upgrade functions.
1
Display Setup using Home menu and use J K to
select Connect to network, then press OK.
Connect to network
Before you proceed to Connection test or other settings in
Network section, run the network settings assistant to
connect the TV to your network.
Wireless setting
Select to use a wireless LAN to connect to the internet by a
wireless connection.
2
Use H I to select Wireless, then press OK.
3
Use J K to select the desired setting, then press OK,
and follow the on-screen instructions.
Select this setting if your router has an easy
connect button. Start scanning for wireless
networks on the TV after pressing the easy
Simple Connect
connect button on your router. If connection
test fails, refer to the router's manual for more
details.
Search for wireless networks automatically
Scan
and select the wireless network name (SSID)
from the list.
Set up the connection to the wireless LAN
Access Point (AP) (e.g. wireless router)
Manual entry
manually by entering the wireless network
name (SSID).
O
Note(s)
Download the Web Owner's manual on the http://
●
www.magnavox.com/support website to read the procedure on
how to use the software keyboard to enter the security key for
the Manual entry procedure.
Wired setting
Select to use an Ethernet cable to connect to the internet by
a wired connection. Please purchase shielded Ethernet
cables at your local store and use it when you connect to
network equipment.
2
Use H I to select Wired, then press OK.
Connection test will start automatically. (Refer to Connection
●
test L p. 8.)
Connection test
Perform the following steps to test your internet
connection after you have connected an Ethernet cable
or entered network settings such as IP address, DNS
settings, etc. manually.
1
Display Setup using Home menu and use H I J
K to select Network settings, then press OK.
2
Use H I to select Connection test, then press
OK.
Connection test will start automatically and the test
●
result for home network and internet will appear right
after the connection test finishes.
"Testing..." is displayed while the connection test is in
●
progress.
8
Continued on next page.
Advertisement
Table of Contents
