Setting Your Location To Home; Voice Guide; Hdmi Mode - Magnavox 65MV378Y Owner's Manual

Setting your location to home

You can set the Location on your TV to Home or
Retail. Choosing Home gives you full flexibility to
change predefined settings for picture and sound.
1
Press Z and use J K to select Setup then press
OK.
2
Use H I J K to select TV settings, then press
OK.
3
Use H I to select Installation, then press OK.
Language
Picture
Preferences
Sound
Restore default settings
Features
Installation
Accessibility
4
Use H I to select Preferences, then press OK.
5
Use H I to select Location, then press OK.
6
Use H I to select Home, then press OK.
O
Note(s)
You must set Home in the menu. Otherwise, personalized
●
picture and sound settings will not be memorized after the
unit goes into standby mode.

Voice guide

Lets you configure Voice guide and its settings.
1
Press Z and use J K to select Setup then press
OK.
2
Use H I J K to select TV settings, then press
OK.
3
Use H I to select Accessibility, then press OK.
4
Use H I to select Voice guide, then press OK.
Off
Voice guide
toggle
On
Fast
Speed Normal
Slow
High
Pitch Normal
Low
Verbose
Verbosity
Succinct
Loud
Volume level Normal
Soft
To set Voice guide to Off
To set Voice guide to On
Set voice guide speed based
on your preference
Set voice guide pitch based
on your preference
Set voice guide explanation
verbosity based on your
preference
Set voice guide volume
based on your preference

HDMI mode

If there are issues with picture/color and/or sound
when connecting an external device using the HDMI
port, please try switching the HDMI mode following the
instructions below.
1
Press Z and use J K to select Setup then press
OK.
2
Use H I J K to select TV settings, then press
OK.
3
Use H I to select Installation, then press OK.
4
Use H I to select Preferences, then press OK.
5
Use H I to select HDMI mode, then press OK.
6
Use H I to select HDMI1, HDMI2 or HDMI3, then
press OK.
7
Use H I to select 4K mode or 2K mode
(Compatibility) depending on the output
capabilities of the external device, then press OK.
When switching the HDMI configuration, the screen will
●
black out for a moment, then come back on.
O
Note(s)
The HDMI connector with HDMI mode set to 2K mode
●
(Compatibility) supports up to UHD 30P, while The HDMI
connector with HDMI mode set to 4K mode supports up to
UHD 60P with HDR signal.
Switching the HDMI mode may cause loss of HDMI CEC
●
functionality in certain cases.
14 Continued on next page.