Table of Contents
Advertisement
Cursor I
Horizontal position
To move PC screen left
Vertical position
To move PC screen down To move PC screen up
Changing sound settings
1
Press Z and use J K to select Setup then press
OK.
2
Use H I J K to select TV settings, then press
OK.
3
Use H I to select Sound, then press OK.
Auto sound
Picture
Equalizer
Sound
Balance
Features
Sonic Emotion Premium
Installation
Auto volume leveling
Accessibility
TV speakers
Headphone volume
Digital output format
Delta volume
4
Use H I to select the item you want to adjust, then
press OK.
The following sound settings can be configured.
●
Depending on the sound source, some sound settings
are not available.
To select the desired setting, then press OK
Auto sound
(Personal, Standard, Vivid, Sports, Movie, Music
and News)
To select the specific frequency using J K, and
Equalizer
use H I to adjust the level, then press OK
Adjusts the balance of the right and left speakers
Balance
to best suit your listening position
Off
Sonic
Emotion
On
Off
Dialog
Enhancement
Sonic
On
Emotion
Off
Premium
Bass
Enhancement
On
Off
Absolute 3D
Sound
On
Off
Auto volume leveling
On
Off
TV speakers
On
Speakers
fun-link
Headphone volume
Adjusts headphone volume
Cursor H
To move PC screen right
To set Sonic Emotion to off
To set Sonic Emotion to on
To set Dialog Enhancement to off
To set Dialog Enhancement to on
To set Bass Enhancement to off
To set Bass Enhancement to on
To set Absolute 3D Sound to off
To set Absolute 3D Sound to on
To remove the Auto volume leveling
To reduce volume differences
between the TV commercials and
the programs
No output sound from the unit's
speakers
To output sound from the unit's
speakers
To control audio output from your
connected HDMI link devices
Digital output format
Provides the ability to set a custom volume level
for the current channel or input source.
If the source volume is too loud, set a negative
Delta volume
value (-1 to -12)
If the source volume is too soft, set a positive
value (+1 to +12)
Changing picture format
Display modes can be selected when your TV receives
a 16:9 or 4:3 video signal.
Three types of display modes can be selected for a PC input
signal.
Press PICTURE SIZE A repeatedly to switch the TV
aspect ratio.
For 16:9 video signal (2160p)
Full
For 16:9 video signal (not 2160p)
Manual Zoom
Other than DTV and HDMI connected devices,
enlarges the picture to best fit the screen. DTV and
HDMI connected devices display the picture at its
Automatic
original size.
The subtitles may remain visible.
Displays a 16:9 picture at a 4:3 size; the picture is
4:3
shortened horizontally. Sidebars appear on both
edges of the screen.
Displays a 16:9 picture that is stretched horizontally
Wide screen
and vertically.
Unscaled
Displays a 16:9 picture at its original size.
Displays a scaled 16:9 picture. Bars appear on both
Full
the upper and lower portions of the screen depending
on the type of video signal.
Allows step by step vertical and horizontal stretching
of the picture size to suit your viewing preferences.
Manual Zoom
Manual zoom can distort the aspect ratio of the
image, to switch back to a normal mode select
Automatic / Normal.
11
PCM
To output PCM format
To output audio in its native format
Bitstream
as Bitstream to connected audio
receiver
Manual Zoom
Unscaled
Automatic
Unscaled
Wide screen
Continued on next page.
4:3
Advertisement
Table of Contents
