Other Information; Alarm Message List - Olympus DS-2600 Instructions Manual

Alarm message list

Message
[Battery low]
[Power supply error
Remove power plug]
[File locked]
[Further marking not
possible]
5
[Memory full]
[Folder full]
[Erasing error]
[Card error]
[Format error]
[Memory error]
[Insert SD card]
[Switch position error]
[Can't create the system
file. Erase unnecessary
file via PC.]
EN
38

Other information

Explanation
The remaining battery power is low.
Voltage outside of the allowable limit has been
detected.
Editing or deleting the file is not possible.
The maximum number of Index marks has been
reached (max 32 Index marks per file).
No remaining memory.
The maximum number of files has been reached
(max 200 files per folder).
An error occurred while erasing.
The memory card was not recognized correctly.
A formatting problem occurred.
An internal memory error occurred.
The recorder cannot find the memory card.
The position of the slide switch is incorrect.
The management file cannot be created due to
insufficient space on the memory card.
Action
Charge the battery (☞ P.8).
Use the dedicated AC Adapter (☞ P.10).
Unlock the file (☞ P.29).
Erase index marks that are no longer required
(☞ P.26).
Erase unnecessary files or insert another
memory card (☞ P.12, P.23).
Erase unnecessary files (☞ P.23).
Erase once again. When an erase error occurs,
format the memory card (☞ P.32).
Remove and insert the memory card again
(☞ P.12).
Format again (☞ P.32).
Contact the Olympus Customer Support Center
(☞ back cover).
Insert a memory card (☞ P.12).
Align the slide switch with the correct position
(☞ P.15).
Connect the recorder to a computer and delete
unnecessary files.