Samsung SP-M205W Owner's Instructions Manual page 54

ICONS STATUS
Warning
Warning
Error
Temperature Level Status Icons
ICONS
Temperature status
Temperature status
Temperature status
Temperature status
Temperature status
Temperature status
• Managing the Projectors
: Using the icons in the <Projector List> (only applicable to 'V'-marked projectors in the monitoring window)
(Refresh): Updates the status of the projector.
(Power On): Turns on the power of the projector.
(Power Off): Turns off the power of the projector.
Using
The air filter has reached the end of its life.
The air filter has been blocked by dust.
The air filter has been blocked by dust.
STATUS
The projector's internal temperature is
normal.(standby mode)
The projector's internal temperature is
normal.(low)
The projector's internal temperature is
normal.(medium)
The projector's internal temperature is
normal.(little bit high)
The projector's internal temperature is
higher than the limit.
The projector's internal temperature is too
high. The projector is turned off automati-
cally.
STATE
STATE
ACTION
The air filter needs to be replaced.
The air filter needs to be cleaned.
The air filter needs to be cleaned.
ACTION
None. It's normal.
None. It's normal.
None. It's normal.
None. It's normal.
Refer to Action 3 in Clearing Indi-
cator Problems.
Refer to Action 4 in Clearing Indi-
cator Problems.
3-6