Table of Contents
Advertisement
MENU
Language
Using this function, you can select the language used for the menu screen.
Menu Option
•
•
•
Sound
The projector comes with an internal 7W (mono) speaker. Use the settings below to tailor the sound as
desired.
•
Filter Check Time
Sets the check period for the filter. (Unit: hours)
•
Auto Power On
With <Auto Power On>, if power is supplied to the projector, it turns on automatically without your
pressing the Power button.
•
Sleep Timer
With <Sleep Timer> on, if there is no input signal for the specified time, the projector turns off auto-
matically.
(There must be no button input from the remote control or the top of the projector for the specified
time)
•
Melody
Set so that a melody plays when the Projector is turned on or off.
•
Security
To
you set a password, the projector will not work without it.
•
•
Panel Lock
You can disable the buttons on the projector body so that the
remote control.
•
Information
You can check external source signals, picture setup, and PC picture adjustment.
3-5
<Position> : You can move Menu Position up/down/left/right.
<Transparency> : You can set the translucency of the menu.
•
<High> - <Medium> - <Low> - <Opaque>
<Display Time> : You can set the display time of the menu.
•
<5 sec> - <10 sec> - <30 sec> - <60 sec> - <90 sec> - <120 sec> - <Stay On>
<100Hz> - <300Hz> - <1kHz> - <3kHz> - <10kHz>
<Off> - <100> - <200> - <400> - <800>
If the filter usage time is larger than the filter check period, the filter check message is
displayed for 1 minute whenever the projector is turned on.
Filter check message: "<Check the filter, and if necessary, clean or replace it.>".
<Off> - <On>
<Off> - <10 min> - <20 min> - <30 min>
This function does not work in <Media Play> mode.
<Off> - <Low> - <Medium> - <High>
deter theft, you can set a password that users must enter when the projector powers on. When
<Power On Protection>
•
<Off> : Enter your current password and set the protection function to off.
•
<On> : Enter a new password and set the protection function to on.
<Change Password> : Change your current password.
•
Use the displayed number keys to enter or change the password.
•
If you forgot your password, contact a Samsung Service Center.
<Off> - <On>
DESCRIPTION
projector can only be
operated by the
Using
Advertisement
Table of Contents
