Table of Contents

Advertisement

Mute
(M 12-7-6)
You can mute the microphone while making a video call.
"Settings"
"Video Call Settings"
1.
Select "On" to mute or "Off" to cancel mute.
Assigning Hold Guidance Picture
You can display an image saved in the phone on your main display
while you are putting a call on hold.
"Settings"
"Video Call Settings"
1.
Select "Preset Picture" or "My Pictures".
2.
Select the desired picture.

Security

(M 12-8)
Enabling/Disabling the PIN Code
If the PIN code is enabled you are asked to enter the PIN code each
time the phone is switched on. Your PIN code is registered on the
SIM/USIM card and you should have been made aware of the code
when you purchased the SIM/USIM card. Contact your service
provider for further details.
"Settings"
"Security"
1.
Select "On" to enable the PIN code or "Off" to disable.
2.
Enter your PIN code.
Note
• If you enter the wrong PIN code three times in step 2, the SIM/USIM
card will lock. To remove the lock, contact your service provider/
SIM/USIM card vendor.
"Mute Microphone"
(M 12-7-7)
"Hold Guidance Pict"
(M 12-8-1)
"PIN Entry"
"Switch On/Off"
To Change the PIN Code
This allows you to change the PIN code registered on the SIM/USIM
card. Before you change the PIN code, select "On" in step 1 in
"Enabling/Disabling the PIN Code".
"Settings"
"Security"
1.
Enter the existing PIN code.
2.
Enter a new PIN code.
3.
Enter the new PIN code again.
(M 12-8-2)
Changing the PIN2 Code
The PIN2 code is used to protect certain functions in the phone such
as Fixed Dialling Number and call cost limits. The following shows you
how to change the PIN2 code.
"Settings"
"Security"
1.
Enter the existing PIN2 code.
2.
Enter a new PIN2 code.
3.
Enter the new PIN2 code again.
Handset Lock
(M 12-8-3)
The Handset Lock is an additional security feature which prevents
unauthorised use of the phone or certain features.
"Settings"
"Security"
1.
Select "On" or "Off".
2.
Enter your handset code.
"PIN Entry"
"Change PIN"
"Change PIN2"
"Handset Lock"
Settings
97

Advertisement

Table of Contents
loading

Table of Contents