Entertainment; Network Connection; Connecting To A Wired Network - LG 60PZ570T Owner's Manual

46

ENTERTAINMENT

ENTERTAINMENT

Network Connection

Connecting to a wired network

Connect the TV to a local area network (LAN) via
the LAN port as shown in the following illustration
and set up the network settings.
If wired and wireless networks are both available,
wired is the preferred method.
After making a physical connection, a small
number of home networks may require the TV
network settings to be adjusted. For most home
networks, the TV will connect to automatically
without any adjustments.
For detail information, contact your internet
provider or router manual.
CAUTION
Do not connect a modular phone cable to the
y y
LAN port.
Since there are various connection meth-
y y
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.
After connecting the LAN port, use the Pre-
y y
mium or LG Apps menu.
To set up the network settings: (Even if your TV
has already connected automatically, running
setup again will not harm anything),
1
Press Home to access the Home menu.
2
Press the Navigation buttons to scroll to SETUP
and press OK.
3
Press the Navigation buttons to scroll to
NETWORK and press OK.
4
Press the Navigation buttons to select Network
Setting and press OK.
5
If wired and wireless are simultaneously
connected, press the Navigation buttons to select
Wired and press OK.
6
If you have already set the Network Setting,
select Resetting. The new connection settings
will reset the current network settings.
7
Select IP Auto Setting or IP Manual Setting.
- If selecting IP Manual Setting, press the
Navigation and Number buttons. IP addresses
will need to be input manually.
- IP Auto Setting: Select this if there is a DHCP
server (Router) on the local area network (LAN)
via wired connection, the TV will automatically
be allocated an IP address. If you're using a
broadband router or broadband modem that
has a DHCP (Dynamic Host Configuration
Protocol) server function. The IP address will
automatically be determined.
- IP Manual Setting: Select if there is no DHCP
server on the network or you want to set the IP
address manually.
8
When you are finished, press EXIT.