20
ASSEMBLING AND PREPARING
Mounting on a table
1
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
2
Connect the power cord to a wall outlet.
CAUTION
Do not place the TV near or on sources of
y
y
heat, as this may result in fire or other damage.
NOTE
Swivel 20 degrees to the left or right and adjust
y
y
the angle of the TV to suit your view.
10 cm
10 cm
10 cm
Securing the TV to a table
Only 32/37LV37 ** , 32/37LV47 ** , 32LW47 **
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
Mount the TV on a table, and then insert and
tighten the supplied screw on the rear of the stand.
WARNING
To prevent the TV from falling over, the TV
y
y
should be securely attached to the floor/wall
per installation instructions. Tipping, shaking,
or rocking the TV may cause injury.