Table of Contents
Advertisement
Problem
LED warning indicator
(LED) is solid amber
TEMP warning indicator
(LED) is blinking amber
The remote control is
not operating smoothly
or works only within a
limited range
52 English
Possible Solution
A projector LED has failed and the projector will auto-
y
matically shut down. If the problem persists, contact
Optoma.
The projector has overheated. The display automati-
y
cally shuts down. Turn the display on again after the
projector cools down. If the problem persists, contact
Optoma.
If the projector fan fails, the projector will automatically
y
shut down. Clear the projector mode by pressing and
holding the Power button for 10 seconds. Please wait
for about 5 minutes and try to power up again. If the
problem persists, contact Optoma.
The battery may be low. Check if the LED indication
y
from the remote is too dim. If so, replace with a new
CR2025 battery.
Advertisement
Table of Contents
