Table of Contents
Advertisement
Turning On/Off the Projector
Turning Your Projector On
Note:
Turn on the projector before you turn on the source (computer, DVD player, etc.). The Power
button light blinks amber until pressed.
1.
Connect the power cord with AC adapter and appropriate signal cables to the pro-
jector.
2.
Remove the lens cap.
3.
Press the
Power button.
4.
Turn on your source (computer, DVD player, etc).
5.
Connect your source to the projector using the appropriate cable.
6.
The input source is determined by the last connected input source. (By default, the
input source of the projector is set to Multimedia). Change the input source of the
projector if necessary.
Turning Your Projector Off
Note:
The " Press Power Button to Turn Off Projector " message will appear on the screen. The mes-
sage disappears after 5 seconds or you can press the Menu button to clear it.
1.
Press the
Power button. Follow the instruction displayed on screen to properly turn
off the projector.
2.
Press the
Power button again. The cooling fans continue to operate for 3~5 sec-
onds.
3.
Disconnect the power cord and AC adapter from the electrical outlet and the projec-
tor.
22 English
Advertisement
Table of Contents
