Setup - Optoma ML750ST User Manual

Setup

The Setup menu allows you to choose the default OSD language, modify boot-up
source, set sleep timer, and other options.
Language : Set the language for the OSD. Options are: English, Germany, French,
Italian, Spanish, Portuguese, Polish, Dutch, Russian, Swedish, Greek, 中文 (繁), 中
文 (简), Janpanese, Korean, and Turkish.
Boot-Up Source
HDMI / MHL, and Media.
Note:
If the Boot-Up Source is set to"Auto" then at each boot-up of the projector the input
source is always chosen the same as in previous session.
Direct Power On
automatically power on when AC power is supplied, without pressing the Power but-
ton on the projector control panel or on the remote control.
Sleep Timer : Set the countdown timer interval. The countdown timer will start, with or
without a signal being sent to the projector. The projector will automatically power off
when the countdown has finished. Options are: Auto, Off, 30 min, 1 hour, 3 hours,
8 hours, 12 hours.
Note:
If the Sleep Timer is set to"Auto" then the project will automatically power off after 15
minutes if no signal has been detected.
Language
Boot-Up Source
Direct Power On
Sleep Timer
Advanced
Reset
Ver.
Select
: Select the projector's boot-up source. Options are: Auto, VGA,
: Choose On to activate Direct Power mode. The projector will
Setup
English
Auto
Off
Auto
Exit Enter
29
English