BenQ Home Cinema Series User Manual page 43

High Altitude Mode
Password
Key Lock
LED Indicator
Reset All Settings
ISF
The mode is for operation in areas like high altitude or high temperature
environments. Activate the function when your environment is between 1500 m
–3000 m above sea level and ambient temperature is between 0°C–30°C.
Do not use this function if your altitude is between 0 m and 1500 m and
ambient temperature is between 0°C and 35°C. If you turn on the mode
under such a condition, the projector will be over cooled.
Operation under High Altitude Mode may cause a higher decibel operating
noise level because of increased fan speed necessary to improve overall system
cooling and performance.
If you use this projector under other extreme conditions excluding the above, it
may display auto shut-down symptoms, which is designed to protect your
projector from over-heating. In cases like this, you should switch to High
Altitude Mode to solve these symptoms. However, this is not to state that
this projector can operate under any and all harsh or extreme conditions.
For security purposes and to prevent unauthorized use, you may set up
password security for the projector. See
details.
• Change Password
You will be asked to enter the current password before changing to a new one.
• Power On Lock
Limits use of the projector to only those who know the correct password.
With the control keys on the projector locked, you can prevent your projector
settings from being changed accidentally (by children, for example).
When you select On to enable this function, no control keys on the projector
will function, except
To unlock the keys, press and hold
When you select On, all LED indicators on the projector function normally. See
Indicators for more details.
When you select Off, the LED indicators (
turn on the projector and the splash screen displays. However, if the projector
is not working properly, the LED indicators light or flash to remind you that a
problem may occur. See also
Returns all settings to the factory preset values. The OSD menu type will return
to the Basic OSD menu.
The following settings will still remain: Keystone, Language, Projector
Position, Reset Lamp Timer, High Altitude Mode, Password, Key Lock,
and ISF.
The ISF calibration menu is password protected and only accessible by
authorized ISF calibrators. The ISF (Imaging Science Foundation) has developed
carefully crafted, industry-recognized standards for optimal video performance
and has implemented a training program for technicians and installers to use
these standards to obtain optimal picture quality from BenQ video display
devices. Accordingly, we recommend that setup and calibration be performed
by an ISF certified installation technician.
For more information, go to www.imagingscience.com or contact the
dealer or retailer from whom you purchased the projector.
Utilizing the password function
POWER.
on the projector for 3 seconds.
Indicators for more details.
, , ) are off after you
Menu Functions
for
43