BenQ Home Cinema Series User Manual page 20

Hide thumbs Also See for Home Cinema Series:

Table of Contents

Step 3:

Specify Vertical Keystone.

For more information about vertical

keystone, see

Step 4:

Specify Auto Source.

Select On if you want the projector to

always search for available signals

automatically when the projector is

turned on.

Step 5:

Specify Menu Type.

For more information about menu

types, see

Now you've completed the initial setup.

4. If you are prompted to enter the password, use the arrow keys on the projector or remote control

to enter a six-digit password. See

5. Switch on the connected equipment.

6. The projector starts to search for available input signals. The current input signal being scanned

displays on the screen. If the projector does not detect a valid signal, the "No Signal" message

appears. You may press SOURCE on the projector or remote control to select your desired input

signal.

7. If the horizontal frequency of the input source exceeds the range supported the projector, the "No

Signal" message displays on the screen. It will remain on-screen until you change the horizontal

frequency of the input source to an appropriate one.

Operation

Correcting

keystone.

About the OSD

Menus.

Utilizing the password function

for details.

Table of Contents

Ht2050