BenQ Home Cinema Series User Manual page 31

• Menu Type
Switches to the Advanced OSD menu.
Selects an input source type for the HDMI signal. You can also manually select the
source type. The different source types carry different standards for the brightness
• HDMI
level.
Format
Activate this function only after a new lamp is installed. When you select Reset, a
• Reset Lamp
"Reset Successfully" message displays to notify that the lamp time has been reset to
Timer
"0".
Returns all settings to the factory preset values.
• Reset All
Settings
Displays the following information about your projector.
• Information
HDMI Format is only available when the HDMI signal is selected.
The following settings will still remain: Keystone, Language, Projector Position,
Reset Lamp Timer, and High Altitude Mode
• Source: Displays the current signal source.
• Picture Mode: Displays the current Picture Mode.
Resolution: Displays the native resolution of the input source.
•
• Color System: Displays input system format.
• Lamp Usage Time: Displays the number of hours the lamp has been used.
3D Format: Displays the current 3D mode.
•
3D Format is only available when 3D Mode is enabled.
• Firmware Version: Displays the firmware version of your projector.
Some information is given only when certain input sources are in use.
.
Menu Functions 31