Table of Contents
Advertisement
! Cassette deck
Symptom
" Cannot record.
" Is the erase-prevention tab removed?
" Cannot record tracks with proper
" Is it a normal tape? (You cannot record on
sound quality.
a metal or CrO tape.)
" Cannot erase completely.
" Sound skipping.
" Is there any slack?
" Is the tape stretched?
" Cannot hear treble.
" Are the capstans, pinch rollers, or heads
dirty?
" Sound fluctuation.
" Cannot remove the tape.
" If a power failure occurs during playback,
the heads remain engaged with the tape.
Do not open the compartment forcibly.
Wait until electricity resumes.
! Remote control
Symptom
" The remote control does not oper-
" Is the AC power lead of the unit plugged
ate.
in?
" Is the battery polarity respected?
" Are the batteries dead?
" Is the distance or angle incorrect?
" Does the remote control sensor receive
strong light?
! Condensation
Sudden temperature changes, storage or operation in an extremely humid environ-
ment may cause condensation inside the cabinet (CD pickup, tape heads, etc.) or on
the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens, leave the power on
with no disc (or cassette) in the unit until normal playback is possible (about 1 hour).
Wipe off any condensation on the transmitter with a soft cloth before operating the
unit.
! If trouble occurs
When this product is subjected to strong external interference (mechanical shock,
Possible cause
excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on again.
2 If the unit is not restored in the previous operation, unplug and plug in the unit,
and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by resetting it.
! Clearing all the memory (reset)
1 Press the ON/STAND-BY button to enter the power stand-by mode.
2 Whilst pressing down the CLOCK button and the EQUALIZER/X-BASS/DEMO
button, press the ON/STAND-BY button until "CLEAR AL" appears.
Possible cause
Caution:
This operation will erase all data stored in memory including clock, timer settings,
tuner preset, and CD programme.
! Before transporting the unit
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Press the
Remove all CDs inserted in the unit.
4 Press the
Make sure that "NO DISC" is displayed.
5 Press the ON/STAND-BY button to enter the stand-by mode, and then unplug
the AC power lead from the wall socket.
OPEN/CLOSE button to open the disc tray.
OPEN/CLOSE button to close the disc tray.
03/11/28
CD-DP900S(E)3.fm
CD-DP900S
9
29
TINSEA032AWZZ
Advertisement
Table of Contents
