Sharp CP-DP900S Operation Manual page 25

Table of Contents

Advertisement

To adjust the speaker volume:
1
When in the normal or phantom mode, press the TEST TONE but-
ton.
The test tone will be heard from each speaker, in order, at about 2-second inter-
vals.
In normal mode:
Left (L ch)
Centre (C ch)
Right (R ch)
In phantom mode:
Left (L ch)
Right (R ch)
Surround (S ch)
2
Adjust the speaker volume level whilst the test tone is being out-
put from the centre or surround speakers.
To set the centre speaker volume to the level of the front speakers:
When in the normal mode, press the CENTER LEVEL
volume and the CENTER LEVEL
To set the surround speaker volume to the level of the front speak-
ers:
When in the normal or phantom mode, press the SURROUND LEVEL
to increase the volume and the SURROUND LEVEL
! You can change the volume level within the range of +10dB to -10dB, in 1 dB
steps.
3
After adjusting the speaker volume level, press the TEST TONE
button.
The test tone will stop.
To balance the front speakers:
Press the BALANCE
Surround (S ch)
level will increase), and press the BALANCE
level (the right speaker level will increase).
Notes:
! Be sure to adjust the sound at your favorite listening position.
! The volume settings for the centre and surround speakers are stored in memory
for future use. However, after a power failure or leaving the unit unplugged for
over one day, they will return to initial settings.
button to increase the
button to decrease it.
...
...
-10
-9
0
+9
button to decrease it.
...
...
-10
-9
0
+9
button to decrease the right speaker level (the left speaker
button to decrease the left speaker
1
15
03/11/28
CD-DP900S(E)2.fm
CD-DP900S
+10
button
+10
8
1
15
25
TINSEA032AWZZ

Advertisement

Table of Contents
loading

Table of Contents