Specialfeatures - Omron STC-SBS312POE Product Specifications And User's Manual

SpecialFeatures

Name
ReloadGammaData
GammaMode
Min_ShutterTime
Max_ShutterTime
AGCRange
TargetBrightness
ALC_Peak_Average
DigitalGain
ALCWeight1
ALCWeight2
ALCWeight3
ALCWeight4
ALCWeight5
ALCWeight6
ALCWeight7
ALCWeight8
ALCWeight9
ALCWindowV1
ALCWindowV2
ALCWindowV3
ALCWindowV4
ALCWindowH1
ALCWindowH2
ALCWindowH3
ALCWindowH4
WB_WindowH1
WB_WindowH2
WB_WindowV1
WB_WindowV2
WB_WindowMode
YThreshold
ModeCode
HardwareVersion
STC-SBS312POE / STC-SCS312POE / STC-SBS500POE / STC-SCS500POE
Product Specifications and User's Guide
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
Description
Gamma table reload from EEPROM to RAM.
Gamma mode selection.
Minimum shutter speed for Auto shutter control mode. Unit: us.
Maximum shutter speed for Auto shutter control mode. Unit: us
Maximum gain value for AGC.
Target brightness for ALC.
Ratio of peak and average fro ALC.
Digital gain
Weight of the area determined by ALCWindowV1, ALCWindowV2, ALCWindowH1 and
ALCWindowH2 for ALC.
Weight of the area determined by ALCWindowV1, ALCWindowV2, ALCWindowH2 and
ALCWindowH3 for ALC.
Weight of the area determined by ALCWindowV1, ALCWindowV2, ALCWindowH3 and
ALCWindowH4 for ALC.
Weight of the area determined by ALCWindowV2, ALCWindowV3, ALCWindowH1 and
ALCWindowH2 for ALC.
Weight of the area determined by ALCWindowV2, ALCWindowV3, ALCWindowH2 and
ALCWindowH3 for ALC.
Weight of the area determined by ALCWindowV2, ALCWindowV3, ALCWindowH3 and
ALCWindowH4 for ALC.
Weight of the area determined by ALCWindowV3, ALCWindowV4, ALCWindowH1 and
ALCWindowH2 for ALC.
Weight of the area determined by ALCWindowV3, ALCWindowV4, ALCWindowH2 and
ALCWindowH3 for ALC.
Weight of the area determined by ALCWindowV3, ALCWindowV4, ALCWindowH3 and
ALCWindowH4 for ALC.
1st vertical line (1st from the top) position for the area for ALC.
2nd vertical line (2nd from the top) position for the area for ALC.
3rd vertical line (3rd from the top) position for the area for ALC.
4th vertical line (4th from the top) position for the area for ALC.
1st horizontal (1st from the left) position for the area for ALC.
2nd horizontal (2nd from the left) position for the area for ALC.
3rd horizontal (3rd from the left) position for the area for ALC.
4th horizontal (4th from the left) position for the area for ALC.
Horizontal start position of the area for auto white balance (Horizontal start position from
left)
Horizontal end position of the area for auto white balance (Horizontal end position from
left)
Vertical start position of the area for auto white balance (Vertical start position from left)
Vertical end position of the area for auto white balance (Vertical end position from left)
Select white balance window mode.
The value for auto white balance is determined with the color information of the pixels,
which is more than this threshold.
Mode code.
Hardware version.
No.16S019-05
59/62