Genicam Command List; Devicecontrol; Imageformatcontrol - Omron STC-SBS312POE Product Specifications And User's Manual

Gige vision camera cmos color / monochrome
Table of Contents

Advertisement

9.13

GenICam Command List

DeviceControl

Name
DeviceVendorName
DeviceModelName
DeviceManufacturerInfo
DeviceVersion
DeviceID
DeviceUserID
DeviceScanType
DeviceTemperature
DeviceReset

ImageFormatControl

Name
SensorDigitizationTaps
Width
Height
SensorShutterMode
DecimationHorizontal
DecimationVertical
RegionSelector
ReverseX
ReverseY
PixelFormat
PixelCoding
PixelSize
PixelColorFilter
TestImageSelector
OffsetX
OffsetY
STC-SBS312POE / STC-SCS312POE / STC-SBS500POE / STC-SCS500POE
Product Specifications and User's Guide
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
Description
Name of the manufacturer of the device.
Model of the device.
Manufacturer information about the device.
Version of the device.
Device's serial number.
User-programmable device identifier.
Scan type of the sensor of the device.
Device temperature in degrees Celsius (C).
Reset the device to its power up state.
Description
Number of digitized samples outputted simultaneously by the camera A/D conversion
stage.
Width of the image provided by the device (in pixels).
Height of the image provided by the device (in pixels).
Sets the shutter mode of the device.
Horizontal sub-sampling of the image. This reduces the horizontal resolution (width) of
the image by the specified horizontal decimation factor.
Vertical sub-sampling of the image. This reduces the vertical resolution (height) of the
image by the specified vertical decimation factor.
Selects the Region of interest to control. The RegionSelector feature allows devices that
are able to extract multiple regions out of an image, to configure the features of those
individual regions independently.
This feature is used to flip horizontally the image sent by the device. The AOI is applied
after the flipping.
This feature is used to flip vertically the image sent by the device. The AOI is applied
after the flipping.
Format of the pixels provided by the device. It represents all the information provided by
PixelCoding, PixelSize, PixelColorFilter combined in a single feature.
Coding of the pixels in the image, Raw gives the data in the native format of the sensor.
Total size in bits of a pixel of the image.
Type of color filter that is applied to the image.
Selects the type of test image that is sent by the camera.
Horizontal offset from the origin to the region of interest (in pixels).
Vertical offset from the origin to the region of interest (in pixels).
No.16S019-05
54/62

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stc-scs312poeStc-sbs500poeStc-scs500poeStc-sc500poe

Table of Contents