Table of Contents
Advertisement
9.11 Trigger
Trigger signal processing procedure
The camera internal process for the external hardware trigger signal or the software trigger signal input is below:
The trigger signal is selectable by the register accesses or the GenICam commands.
Switching point 1: Select the trigger signal setting for GenICam
Sets Software at TriggerSource for the software trigger signal input.
Sets Hardware at TriggerSource for the hardware =Hardware on GenICam
TriggerSource=Line0 on GenICam
STC-SBS312POE / STC-SCS312POE / STC-SBS500POE / STC-SCS500POE
Product Specifications and User's Guide
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
No.16S019-05
51/62
Advertisement
Table of Contents
