Exposure Timing with the Positive Polarity Trigger Signal
Input Trigger signal
Trigger signal
(With Photocoupler delay)
Exposure time
Note 1: The trigger signal will be removed by the filtering if the active pulse width of the input trigger signal is less than
"LineDebounceTime" setting time. Please input more than "LineDebounceTime" time active pulse width of the
trigger signal.
Note 2: The exposure will start "LineDebounceTime + photocoupler delay" time after the rising edge of the input trigger
signal.
Exposure Timing with the Negative Polarity Trigger signal
Input Trigger signal
Trigger signal
(With Photocoupler delay)
Exposure time
Note 1: The trigger signal will be removed by the filtering if the active pulse width of the input trigger signal is less than
"LineDebounceTime" setting time. Please input more than "LineDebounceTime" time active pulse width of the
trigger signal.
Note 2: The exposure will start "LineDebounceTime + photocoupler delay" time after the falling edge of the input trigger
signal.
STC-SBS312POE / STC-SCS312POE / STC-SBS500POE / STC-SCS500POE
Product Specifications and User's Guide
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
Filtering *Note.1
Debounce
Less than
15useconds
Filtering *Note.1
Debounce
Less than
60 useconds
T1'
Exposure tim: T1' = Preset exposure time
T1'
Exposure tim: T1' = Preset exposure time
No.16S019-05
33/62