Advertisement
Quick Links
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
·
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
·
These instructions contain important care, cleaning, and
warranty information -
consumer
.
ORDERING INFORMATION
VEIL Skirted 1PC Lighting 305mm .....................K-1381T-XTS
Includes
Elongated Slim Seat ...............................K-77070T
VEIL
Skirted 1PC Lighting
Includes Elongated Slim Seat ................................K-77070T
NOTES
·
Observe all local plumbing and building codes.
·
Shut off the water supply.
·
Seat post holes are on 140mm (5-1/2") centers.
·
Ensure that the new drain has the correct roughing-in
dimension. This toilet has a 305mm /400mm roughing-in
dimension.
See Fig. #1
·
Closet flange must be 305mm/400mm on-center from wall.
·
Carefully inspect the new fixture for any sign of damage.
·
For new construction, refer to the dimensions in
and Fig. #3
for locating the shut-off valve.
·
Fixture dimensions are nominal and conform to tolerances
established by ASME Standards (A112.19.2-2018).
·
This product complies with Q/KCI-006-2018.
WARNING: Risk of personal injury or product
damage
: Handle vitreous china products very carefully.
Vitreous china can break and chip if you overtighten
bolts and nuts.
WARNING: Risk of external leakage
nut has been factory-tightened to design specifications.
If re-tightening is required, wrench tighten one turn
past finger tight .
No.2 KOHLER ROAD, SANSHUI CENTRAL INDUSTRIAL PARK, LEPING TOWN, SANSHUI DIST., FOSHAN, GUANGDONG, PRC
8# MENGSHAN RD, ECONOMIC DEVELOPMENT ZONE OF HUANTAI, ZIBO, SHANDONG, CHINA
NO.1 KOHLER STREET, ECONOMIC DEVELOPMENT ZONE OF FAKU COUNTY, SHENYANG LIAONING PROVINCE, PRC
1371050-T01-A
please leave instructions for the
400mm .....................K-1382T-XTS
.
Fig. #1
. The fill valve
·
·
·
(
(
·
·
·
140mm
·
305mm/400mm(
·
·
·
·
2018.
·
Q/KCI-006-2018
2
528137
8
256410
1
110400
©
Copyright Kohler China Investment Co., Ltd. 2019
-1-
©
VEIL
INSTALLATION INSTRUCTIONS
SKIRTED 1PC LIGHTING
(
S-TRAP 305mm K-1381T-XTS
S-TRAP 400mm K-1382T-XTS
)305mm........K-1381T-XTS
...........................................K-77070T
)400mm........K-1382T-XTS
...........................................K-77070T
1)
305mm/400mm
1
3
ASME
A112.19.2-
POST CODE 528137
POST CODE:
256410
POST CODE:
)
-
:
110400
2019
Advertisement
Related Manuals for Kohler K-1381T-XTS
Summary of Contents for Kohler K-1381T-XTS
- Page 1 If re-tightening is required, wrench tighten one turn past finger tight . No.2 KOHLER ROAD, SANSHUI CENTRAL INDUSTRIAL PARK, LEPING TOWN, SANSHUI DIST., FOSHAN, GUANGDONG, PRC POST CODE 528137 528137 8# MENGSHAN RD, ECONOMIC DEVELOPMENT ZONE OF HUANTAI, ZIBO, SHANDONG, CHINA...
-
Page 2: Installation
Finished Wall 305/400 Fig.#1 Kohler reserves the right to change marked dimensions without prior notice. INSTALLATION TO REMOVE EXISTING TOILET Turn off the water supply. Flush the toilet, and use a sponge to remove the remaining water from the tank and bowl. - Page 3 The expansion of cement due to a rise in temperature may make the toilet crack or cause damage. Kohler is not responsible for any damage caused by installation with the use of cement. TO INSTALL SUPPLY...
- Page 4 Firmly press the toilet gasket onto the toilet outlet of plastic trap. Plastic Trap Outlet Toilet Gasket NOTE 1: Wax ring type toilet gasket should not be installed at temperatures less than 21 C. NOTE 2: If you are using a toilet gasket with an integral plastic sleeve, make sure the gasket is positioned Fig.#7...
- Page 5 TO CONNECT WATER SUPPLY Supply Shank* * Flexible hose (not provided) are recommended to connect the supply Supply Shut-Off Valve line to the fill valve. If you use a rigid connection(not provided), take care not to apply side forces to the bottom of the fill valve.
- Page 6 FILL FLOAT WITH BALLAST Adjust the float by the cross-shaped thread and sliding it up or down on the float rod until the water level is at the marked water line. Test flush the toilet. Check all connections for leakage for several days.
- Page 7 1371050-T01-A...
- Page 8 CAUTION: Don t use any cement while installing the toilet. Heat expansion of the toilet may damage the feet of the toilet. Kohler will not be responsible for any damage because of using cement. WARNING: Risk of product damage. Do not throw into the toilet what is easy to block it, such as newspaper, paper pilch, sanitary towel.