Using Effects - Casio Celviano AP-270 BK User Manual

Playing with Different Tones
To adjust the volume balance between
two layered tones
1.
While holding down the FUNCTION button,
use the keyboard keys shown below to adjust
the volume of the layered tones.
C1 C2 C3
Volume of the layered tone
(Second tone you selected)
• To return the volume setting to its initial default, hold
down the FUNCTION button and press both of the
keys at the same time.
EN-8
C4 C5 C6 C7
Center
Volume of the main tone
(First tone you selected)

Using Effects

Reverb : Makes your notes resonate.
Chorus : Adds more breadth to your notes.
• For details about using the keyboard keys for
settings, see "Keyboard Keys Used for Configuring
Settings" (page EN-21).
To apply Reverb
1.
Each press of the REVERB button toggles
reverb between on and off.
• Reverb is applied when it is turned on.
C8
■ To select the reverb type
1.
While holding down the FUNCTION button,
press the keyboard key of the reverb type to
be applied.
1: Room
2: Small hall
3: Large hall
4: Stadium
To apply chorus to a tone
1.
While holding down the FUNCTION button,
use the Chorus keyboard key to cycle
through the available settings.
• Each press of the Chorus keyboard key causes the
Digital Piano to beep according to which setting is
selected, as shown in the table below.
• Chorus
Number of Beeps
1 (long)
1 (short)
2
3
4
About DSP
DSP makes it possible to digitally produce complex
acoustic effects. The DSP is assigned to each tone
whenever you turn on Digital Piano power.
Setting
Off (OFF)
Light Chorus
Medium Chorus
Deep Chorus
Flanger (whooshing effect)