Advertisement
Prepare For Your Next Garden
Replanting Your AeroGarden
If you have already grown a garden in your AeroGarden 3, please follow the instructions below
to reset the nutrient timer:
• Press and hold "Reset" button until red "Add Nutrient" light blinks (about 6 seconds).
• Release "Reset" button.
• Quickly press and release "Reset" button. "Add Nutrient" light will blink once and nutrient timer will be
reset.
noTe: These steps do not reset grow bulb timer.
Add Nutrient
Remember to...
• Replace Grow Bulb after 6 months of use. Replacement bulbs can be ordered at
www.aerogardensupport.com or from your retailer.
• Sanitize AeroGarden 3 before replanting (see page 12).
• Set your Lamp Hood to lowest position when starting a new garden.
13
Add
Nutrient
(continued)
Replace
Bulb
Reset
!
Bundle cord when furnishing is not in use.
Advertisement
