Superior Fireplaces DRT3500 Series Installation And Operation Instruction Manual page 57

Innovative Hearth Products
DRT3500 Series Direct-Vent Gas Fireplaces
Installing the DRT3540 and DRT3545 Series Charred Oak Logs
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log
placement is critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the
flames. Follow the log placement instructions precisely.
NOTE: Do not cover the burner ports.
Table 31 - Charred Oak Log Set
1. If necessary, remove the glass door (Pages 59-60). Locate the placement tabs (Figure 49A or 49B).
2. Bend up the log placement tabs (Figure 49A or 49B). Place glowing embers (Figure 49A).
Figure 49A Figure 49 - Locate log placement tabs, 40"
40" Models
Tab for
Log #2
Place Glowing Embers
3. Align the notches in the left rear log (1) with the left rear locating tab (Figures 49 and 50).
4. Position the Rear Log (2) on the left front and right rear placement locating tabs (Figures 49 and 51).
Figure 50 - Place log #1
2
1
4
5
Tab for Do not place
embers over
Log #1
the big slots
1
Log Number
3
1
2
3
4
5
Catalog number for the entire set: See Page 69 for ordering
information
Figure 49B - Locate log placement tabs, 45"
45" Models
Tab for
Tab for
Log #2
Log #2
Figure 51 - Place log #2
900683-01F, 10/2018
Description
Left Rear Log
Rear Log
Front Right Log
Top Front Right Log
Top Front Left Log
Tab for
Tab for
Log #2
Log #1
2
Operation
Tab for
Log #3
57