Superior Fireplaces DRT3500 Series Installation And Operation Instruction Manual page 55

Innovative Hearth Products
DRT3500 Series Direct-Vent Gas Fireplaces
Installing the DRT3535 Series Charred Oak Logs
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log
placement is critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the
flames. Follow the log placement instructions precisely.
NOTE: Do not cover the burner ports.
Table 30 - Charred Oak Log Set
2
1. If necessary, remove the glass door (Pages 59-60). Locate the placement tabs (Figure 44).
2. Bend up the log placement tabs (Figure 44). Place glowing embers (Figure 44).
Figure 44 - Locate the log placement tabs
Tab for
Log #2
Place Glowing Embers
3. Position the Rear Log (2) on the left front and right rear placement locating tabs (Figures 44 and 46).
4. Position the top front right log (3), as shown in Figure 47 on the locating pin outlined in Figure 46.
Figure 46 - Place log #2
1
3
4
Log Location Tabs
Tab for
Do not place
Log #1
embers over
the big slots
2
Log Number
1
2
3
4
Catalog number for the entire set: See Page 69 for ordering
information
Figure 45 - Place log #1
1
Tab for
Log #2
Figure 47 - Place log #3
Landing area for Log #4
Pin for
Log #3
Operation
900683-01F, 10/2018
Description
Left Rear Log
Rear Log
Top Front Right Log
Top Front Left Log
3
55