Table of Contents
Advertisement
Available languages
Available languages
ENGLISH
16
Thoroughly cleaning of the shaving head
1
Switch off the appliance.
2
Pull the shaving head off the appliance.
Note: The shaving head is fragile. Handle it carefully. Replace the shaving head
if it is damaged.
3
Rinse the shaving head with lukewarm water.
Do not clean the shaving head with the cleaning brush, as this may cause
damage.
4
Remove hairs from the cutters with the cleaning brush.
Note: Do not brush the cutters in a different direction then indicated, as this
may cause damage.
5
After cleaning, snap the shaving head back onto the appliance ('click').
Advertisement
Table of Contents
