Blodgett BCT Installation Operation & Maintenance page 47

Table of Contents

Advertisement

3. When liquid has stopped flowing out of the valve, pull the basin out to finish draining.
4. WIPE DOWN OVEN DOOR GASKET AFTER EACH COOK CYCLE. THIS WILL CONSIDERABLY EXTEND THE LIFE
OF THE GASKET.
5. One clean cycle must be run daily at a minimum.
6. If the vent pipe becomes plugged, once cool, follow the steps below to clean.
a. Remove the vent cover by loosening the screws and moving upward.
b. Remove vertical pipe and elbow. Clean the tubes with a brush. Reinstall the tubes and cover when complete.
Figure 40
Using the Optional Fat Separation System
Remove the vent cover and clean the tubing.
Figure 41
45
Operation

Advertisement

Table of Contents
loading

This manual is also suitable for:

BlctBlct-62-62gBlct-6-10eBct-62-62eBct-62-102eBlct-62g

Table of Contents