Figure 26 Dehum. Mode Circuit Diagram; Pressure Service Ports - Bard Q-TEC Q24H2D Series Installation Instructions Manual

PRESSURE SERVICE PORTS

High and low pressure service ports are installed on
all units so that the system operating pressures can be
observed. Pressure curves can be found later in the
manual covering all models on both cooling and heating
FIGURE 26
Q-TEC COOLING MODE CIRCUIT DIAGRAM
cycles. It is imperative to match the correct pressure
curve to the unit by model number. Upper and lower
service doors must be attached to obtain proper reading.
Manual 2100-603
Page 35 of 44